D55-B24-3058GDA Datasheet, PDF (4/35 Pages) ITT Industries – 1.0/2.3 RF Connector Series

RF Coaxial Connectors
Specification
Electrical
Impedance
Frequency Range
Voltage Rating
Insulation Resistance
Contact Resistance
Reflection Coefficient
(except SMD Jacks see page 12)
50W / 75W nominal
With 50 W connector on 50 W cable = 0 - 2 Ghz
With 75 W connector on 75 W cable = 0 - 2 Ghz
At Sea level = 250 Vrms
1000 MW minimum
Inner contact (50 W) = 4mW maximum
Inner contact (75 W) = 6mW typical maximum
Outer contact (50 W - 75 W) = 2.5mW maximum
With 50 W connector on 50 W cable and f = 1 GHz
With 75 W connector on 75 W cable and f = 1 GHz
Mechanical
Withdrawal Force, inner female contact
Withdrawal force, outer male contact
Insertion force between jacks and plugs
Withdrawal force between jacks and plugs
Materials
Finish/Plating
0.2 N (0.04 lbs.) minimum
0.7 N (0.15 lbs.) minimum
10 N (2.24 lbs.) maximum
0.9 N (0.20 lbs.) minimum
Bodies and nuts: Brass.
Inner male contact: Brass or Berylium Copper.
Inner and outer female contacts: Berylium Copper.
Insulators : PTFE or Thermoplastics.
Crimp ferrules: Copper alloy
Contact surfaces: Gold over Nickel.
Bodies and crimp ferrules: Nickel or Gold over Nickel.
Environmental
General
Temperature Rating -40° C to 85°C
Connector Durability 500 matings minimum
Standards CECC 22230, DIN 47297
1.0/2.3
= 0.05 maximum
= 0.1 maximum
Dimensions are shown in mm (inch)
4
Dimensions subject to change
www.ittcannon.com