D55-B24-3058GDA Datasheet, PDF (3/35 Pages) ITT Industries – 1.0/2.3 RF Connector Series

RF Coaxial Connectors
Introduction
The ITT Industries, Cannon 1.0/2.3 Connectors
are offered in both 50 ohm and 75 ohm series.
These connectors are now widely used in
telecommunication systems where, due to
their smaller size, significant space saving
can be achieved. Ideally suited to RF and high
speed digital equipment, the connectors are
designed to meet the requirements of CECC
22230 and DIN47247.
This range features the Push-Pull coupling
mechanism to provide a secure latch that
prevents accidental disconnection, whilst
allowing ease of mating and unmating.
The range of parts shown in this publication
includes plug and jack connectors for a variety
of cables, together with PCB styles and U
links. Other cable types and connector styles
may be available on request.
Mating Interfaces
Coupling Types
Standard Push-Pull (other types: screw, snap-
on, slide-in available on request)
Screw Type
1.0/2.3
1,15
(.045)
MAX
5,50
(.216)
MAX
0,47/0,52
(.018/.020)
5,40/5,70
(.212/.224)
Plug
3,00/3,06
(.118/.120)
1,15/1,75
(.045/.069)
M 5,5 x 0,5
4,03/4,15
(.158/.163)
6,50 MAX
(.255)
5,90 MAX
(.232)
Jack
2,00
(.078)
45
R0,80
(.031)
7,70
(.303)
3,60
(.141)
1,85
(.072)
M 5,5 x 0,5
3,90
(.153)
6,50
(.255)
8,90
(.350)
13,40
(.527)
Dimensions are shown in mm (inch)
Dimensions subject to change ₃
www.ittcannon.com