D55-B24-3058GDA Datasheet, PDF (12/35 Pages) ITT Industries – 1.0/2.3 RF Connector Series

RF Coaxial Connectors
Description
ITT Industries, Cannon can now offer a range of surface mount coaxial
connectors developed to suit the requirements of modern interconnect
systems. Currently being produced with the emerging standard, 1.0/
W 2.3 75 interface for telecommunication equipments, these new
connectors can be used in fully automated production processes.
Featuring the new MID plated plastic bodies, these new connectors are
constructed in modules comprising 2, 3 or 4 ports. The modules are
light in weight, enabling them to be handled by suction pick and place,
and because all PCB contact pads are formed as part of the moulding,
exceptional coplanarity can be assured.
The provision for additional mechanical fixing of the connector, through
the PCB by rivet or screw is included, which will increase the connector
to board retention. With this additional fixing, a total axial force of
150N per port can be applied.
MID 1.0/2.3
Features
· 2,3 or 4 port configurations
· 1.0/2.3 jack interface
· Coplanarity of +/- 0.05mm
· Flat top for suction pick-up
· Light weight ( 2 port < 5g, 4 port < 13g)
· Tape and reel packed
· Resistant to normal soldering temperatures
· Resistant to most PCB cleaning processes
· Common Grounds
Specification
· 75 ohm nominal impedence
· Interface to CECC 22230 & DIN 47247
· Reflection factor: r = 0.1 up to 500 MHz
· Inner contact resistance :<20m ohm
· Outer contact resistance :<30m ohm
· Proof voltage: 750 Vrms
· Connector to board solder retention : 3N/mm²
Soldering Temperature Profile
280
210
140
70
0
30
60
90
120
150
180
Process time - Seconds
Dimensions are shown in mm (inch)
12
Dimensions subject to change
www.ittcannon.com