80C196EA Datasheet, PDF (43/46 Pages) Intel Corporation – CHMOS 16-BIT MICROCONTROLLER

8xC196EA — AUTOMOTIVE
8.0 DATASHEET REVISION HISTORY
This datasheet is valid for devices with an “C” at the end of the topside field process order (FPO) number.
Datasheets are changed as new device information becomes available. Verify with your local Intel sales
office that you have the latest version before finalizing a design or ordering devices.
This is the -003 version of the datasheet. The following changes were made in this version:
Table 18. Revision History (rev. 002 - 003) (Sheet 1 of 2)
Data Sheet
Item
Figure 1 on page -1
Table 4 on page -7
Table 6 on page -17
Description
Added 80C196EA device to heading. All device references
changed to 8xC196EA.
Revised drawing to reflect “8xC196EA”.
A15:0 - Type - Changed “I/O” to “O” only.
AD15:0 - Description - 8-bit Demultiplexed Mode: Added last para-
graph “AD7:0 share package pins P3.7:0. AD15:8 share package
pins P4.7:0.”
CRIN - Description: Changed “byte” to “bit”.
CROUT - Description: Changed “byte” to “bit”.
ONCE# - Description - 1st paragraph: Added second sentence
“PLLEN must also be held low.”
PLLEN - Description: Added last paragraph “This pin must be held
low when entering on-circuit emulation (ONCE) mode.”
T1CLK - Description: Removed sentence “External clock for the
serial I/O baud-rate generator input (program selectable).”
T2CLK - Description: Added sentence “External clock for the serial
I/O baud-rate generator input (program selectable).”
XTAL1 - Description: Corrected spelling “sourcel” to “source”.
I_PD:
• Typical: Changed “20” to “50”
• Max: Changed “50” to “blank”
I_REF - Max: Changed TBD to “5”.
I_CRVCC - Added row.
I_HO2:
• Min: Changed V_OH2=V_CC-2.5 V to “-65”, V_OH2=V_CC-4.0 V to
“-75”
• Units: Changed all from “mA” to “µA”
I_HO3:
• Parameter: Changed “Port 12”to “Port 11”
• Min: Changed V_OH3=V_CC-1.0 V to “-5”, V_OH3=V_CC-2.5 V to
“-8”, V_OH3=V_CC-4.0 V to “-10”
• Units: Changed all from “mA” to “µA”.
ADVANCE INFORMATION
37