English
Language : 

TC1736 Datasheet, PDF (84/123 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller
TC1736
Electrical Parameters
Table 4
Operating Condition Parameters
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Absolute sum of short Σ|ISC_PG| –
circuit currents of a pin
SR
group (see Table 5)
– 20 mA See note
Inactive device pin
current
Absolute sum of short
circuit currents of the
device
IID
SR -1
Σ|ISC_D|
–
SR
–1
mA All power supply
voltages VDDx = 0
– 100 mA See note4)
External load
capacitance
CL
SR –
––
pF Depending on pin
class. See DC
characteristics
1) Digital supply voltages applied to the TC1736 must be static regulated voltages which allow a typical voltage
swing of ±5%.
2) Voltage overshoot up to 1.7 V is permissible at Power-Up and PORST low, provided the pulse duration is less
than 100 µs and the cumulated summary of the pulses does not exceed 1 h.
3) Voltage overshoot up to 4 V is permissible at Power-Up and PORST low, provided the pulse duration is less
than 100 µs and the cumulated summary of the pulses does not exceed 1 h.
4) See additional document “TC1767 Pin Reliability in Overload“ for definition of overload current on digital pins.
5) The overload coupling factor (kA) defines the worst case relation of an overload condition (IOV) at one pin to
the resulting leakage current (IleakTOT) into an adjacent pin: IleakTOT = ±kA × |IOV| + IOZ1.
Thus under overload conditions an additional error leakage voltage (VAEL) will be induced onto an adjacent
analog input pin due to the resistance of the analog input source (RAIN). That means VAEL = RAIN ×
|IleakTOT|.
The definition of adjacent pins is related to their order on the silicon.
The Injected leakage current always flows in the opposite direction from the causing overload current.
Therefore, the total leakage current must be calculated as an algebraic sum of the both component leakage
currents (the own leakage current IOZ1 and the optional injected leakage current).
6) Applicable for digital outputs.
Data Sheet
80
V1.1, 2009-08