HYB25D128400AT Datasheet, PDF (44/79 Pages) Infineon Technologies AG – 128 Mbit Double Data Rate SDRAM

HYB25D128[400/800/160]A-[6/7/8]
128Mbit Double Data Rate SDRAM
Functional Description
3.5.4 Precharge
The Precharge command is used to deactivate the open row in a particular bank or the open row in all banks. The
bank(s) will be available for a subsequent row access some specified time (t_RP) after the Precharge command is
issued. Input A10 determines whether one or all banks are to be precharged, and in the case where only one bank
is to be precharged, inputs BA0, BA1 select the bank. When all banks are to be precharged, inputs BA0, BA1 are
treated as “Don’t Care.” Once a bank has been precharged, it is in the idle state and must be activated prior to any
Read or Write commands being issued to that bank.
CK
CK
CKE
HIGH
CS
RAS
CAS
WE
A0-A9, A11
A10
BA0, BA1
All Banks
One Bank
BA
BA = bank address
(if A10 is Low, otherwise Don’t Care).
Don’t Care
Figure 29 Precharge Command
Data Sheet
44
Rev. 1.06, 2004-01
09192003-LFQ1-R60G