English
Language : 

TLE8110EE Datasheet, PDF (34/72 Pages) Infineon Technologies AG – Smart Multichannel Low Side Switch with Parallel Control and SPI Interface
FLEX
Smart Multi-Channel Switch
Parallel Inputs
9
Parallel Inputs
9.1
Description Parallel Inputs
There are 10 input pins available are on TLE8110EE to control the output stages.
Each input signal controls the output stages of its assigned channel. For example, IN1 controls OUT1, IN2 controls
OUT2, etc.
A “Low”-Signal at INx switches the related Output Channel off. The zener diode protects the input circuit against
ESD pulses.
For details about the Boolean operation, refer to the chapter “Control of the device”, for details about timing refer
to Figure 11.
9.2
Electrical Characteristics Parallel Inputs
Electrical Characteristics: Diagnostics
3V < VCC < 5.5V; 4.5V < VDD < 5.5V; Vbatt = 13.5V, Tj = -40 °C to +150 °C, all voltages with respect to ground,
positive current flowing into pin
(unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
Parallel Inputs
9.2.1 Low Level of parallel Input pin
VINxl
-0.3 -
VCC* V
-
0.2
9.2.2 High Level of Parallel Input pin
9.2.3 Parallel Input Pin Switching
Hysteresis
VINxh
VINxhy
VCC* -
0.4
15
60
VCC
V
-
300
mV
1)
9.2.4 a) Input Pin pull-down Current
IINxh
20
40
85
µA
VINx=5V
.........b)
IINxl
2.4
-
-
µA
VINx=0.6V1)
1) Parameter not subject to production test. Specified by design.
Data Sheet
34
Rev. 1.0, 2009-06-15