TLE8110EE Datasheet, PDF (12/72 Pages) Infineon Technologies AG – Smart Multichannel Low Side Switch with Parallel Control and SPI Interface

FLEX
Smart Multi-Channel Switch
General Product Characteristics
Absolute Maximum Ratings (cont’d)
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit
Min.
Max.
4.1.17 Input Voltage at all Logic Pin
V_x
4.1.18 Input Voltage at Pin 27, 28 (IN9, 10, ) V_x
Temperatures
-0.3
6.2
V
-0.3
45
V
4.1.19 Junction Temperature
T_j
-40
150
°C
Conditions
t < 10s
permanent
–
4.1.20 Junction Temperature
T_j
-40
175
°C max. 100hrs
cumulative
4.1.21 Storage Temperature
ESD Robustness
4.1.22
Electro Static Discharge Voltage
“Human Body Model - HBM”
T_stg
-55
150
V_ESD
-4
4
4.1.23
4.1.24
Electro Static Discharge Voltage
“Charged Device Model - CDM”
Electro Static Discharge Voltage
“Charged Device Model - CDM”
V_ESD
-500
500
V_ESD
-750
750
1) Only one single channel at one time.
2) triangular test pulse
3) ESD susceptibility, HBM according to EIA/JESD 22-A114-B
4) ESD susceptibility, Charged Device Model “CDM” EIA/JESD22-C101-C
°C –
kV All Pins
HBM³⁾
1.5KOhm, 100pF
V All Pins
CDM⁴⁾
V Pin 1, 18, 19, 36
(corner pins)
CDM⁴⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
4.2
Functional Range
Pos. Parameter
Supply Voltages
4.2.1 Analogue Supply Voltage
4.2.2 Digital Supply Voltage
4.2.3 Digital Supply Voltage
Power Stages
4.2.4 Ground Current
Data Sheet
Symbol
Limit Values
Min.
Max.
V_DD
4.5
5.5
V_CC
3
V_DD
V_CC
V_DD
5.5
I_{GND_typ}
9
12
Unit Conditions
V
–
V
–
V
leakage Currents
(I_CC) might increase
if V_CC > V_DD.
A
resistive loads¹⁾
Rev. 1.0, 2009-06-15