ICS1532 Datasheet, PDF (34/36 Pages) Integrated Device Technology – 110 MHZ TRIPLE 8-BIT ADC WITH CLOCK GENERATOR

ICS1532
110 MHZ TRIPLE 8-BIT ADC WITH CLOCK GENERATOR
Chapter 13 Package Dimensions
This section gives the physical dimensions for the package for the ICS1532, which is a 144-pin LQFP.
• The lead count (N) for the package is 144 leads.
• The nominal footprint (that is the body) for the package is 20 mm × 20 mm × 1.4 mm.
Note:
1. For full mechanical specifications, see JEDEC drawing number MS-026 Rev A.
2. Table 13-1 lists the ICS1532 physical dimensions. These dimensions are:
a. For planning purposes only.
b. Subject to change.
c. Shown in Figure 13-1.
Table 13-1. Physical Dimensions for ICS1532
Symbol
Description
A Full Package Height
A1 Package Body Standoff (the distance from the seating
plane to the base plane of the package body)
A2 Package Body Thickness
b Lead Width
c Lead Thickness
D Tip-to-Tip Dimension
D1 Package Body Dimension
e Lead Pitch
E Tip-to-Tip Dimension
E1 Package Body Dimension
L Lead Tip Length
L1 Lead Length, Entire Length
Q Lead Tip Angle
Min. Nominal Max. Unit
1.60 mm
0.05
0.15 mm
1.35 1.40 1.45 mm
0.17 0.22 0.27 mm
0.09
0.20 mm
22.0
mm
20.0
mm
0.50
mm
22.0
mm
20.0
mm
0.45 0.60 0.75 mm
1.0
mm
0
3.5
7 degrees
MDS 1532 G
34
www.idt.com
Revision 060804