S9407-AB-HBK-010 Datasheet, PDF (59/276 Pages) Glenair, Inc. – HANDBOOK OF SHIPBOARD ELECTROMAGNETIC SHIELDING PRACTICES

S9407-AB-HBK-010, Rev. 2
GR2123 Continued
TABLE II
STANDARD SIZE CONDUIT
CONDUIT
PART
NUMBER
EM02
EM03
EM04
EM05
EM06
EM08
EM10
EM12
EM16
EM20
EM24
CONDUIT
SIZE
(Nom. ID)
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
2-1/2
3
OD
(Over Braid)
0.42±0.01
0.54±0.01
0.69±0.01
0.82±0.01
0.94±0.01
1.25±0.01
1.50±0.01
1.75±0.01
2.28±0.015
2.78±0.015
3.28±0.015
TRANSITION FITTING
END-FITTING
NUT
C
E
F
D
Dia. +.010 ±.005 Max.
-.000
0.25
0.450
0.530
1.03
0.38
0.570
0.650
1.23
0.50
0.720
0.800
1.36
0.62
0.850
0.930
1.59
0.75
0.970
1.050
1.73
1.00
1.280
1.360
1.91
1.25
1.530
1.610
2.28
1.50
1.780
1.860
2.66
2.00
2.315
2.395
3.17
2.50
2.815
2.895
3.97
3.00
3.315
3.395
4.35
DASH
NO.
EM02
EM03
EM04
EM05
EM06
EM08
EM10
EM12
EM16
EM20
EM24
Notes:
1. MATERIAL SHALL BE LOW-CARBON STEEL WITH ELECTROLESS NICKEL COATING PER SAE AMS
2404C EXCEPT END FITTING SHALL BE CRES, 300 SERIES, PASSIVATED.
2. STANDARD MINIMUM LENGTH IS 3 INCHES FOR ONE-PIECE (STYLE A), AND 3.5 INCHES FOR TWO-
PIECE (STYLE B).
3. WHEN CONDUIT OD EXCEEDS “A” DIAMETER, A TWO-PIECE (STYLE B) WILL BE SUPPLIED.
4. ASSEMBLY IDENTIFIED PER MIL-STD-130.
5. DISCARD STUFFING-TUBE GLAND NUT.
6. BASIC PART NO. WITHOUT O-RINGS IS GR2123
BASIC PART NO. WITH O-RINGS IS GRO2123
7. DIMENSIONS IN INCHES.
8. THE AMERICAN NATIONAL THREAD SERIES (N) HAS BEEN SUPERSEDED BY THE UNITED THREAD
SERIES (UN). THE “N” THREAD SIZES LISTED IN TABLE I ARE RETAINED FOR USE WITH THOSE
ITEMS WHICH HAVE “N” THREADS.
Figure 4-5. GR2123 Transition Fitting for Bulkhead
Stuffing Tube (Sheet 2 of 2)
CHANGE 1 of Revision 2
4-14