S9407-AB-HBK-010 Datasheet, PDF (101/276 Pages) Glenair, Inc. – HANDBOOK OF SHIPBOARD ELECTROMAGNETIC SHIELDING PRACTICES

S9407-AB-HBK-010, Rev. 2
RP2360 (Continued)
A THREAD
CODE
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
SHELL SIZE
(Ref.)
B,C
B,C
C
D,E
C,D,F
D,E,F,G
F,G,H
G,H,J
J
C,D,E
C,D,E,F,G
D,E,F,G
F,G,H
G,H,J
J
A THREAD
(Class 2B)
.625-24 UNEF
.750-20 UNEF
.875-20 UNEF
1.000-20 UNEF
1.118-18 UNEF
1.438-18 UNEF
1.750-18 UNS
2.000-18 UNS
2.250-16 UNS
1.125-18 UNEF
1.250-18 UNEF
1.625-18 UNEF
1.875-18 UNS
2.125-16 UN
2.750-16 UN
D DIA
±.015
.875
1.000
1.125
1.250
1.438
1.688
2.000
2.250
2.500
1.375
1.500
1.875
2.125
2.375
3.000
E DIA
±.015
.453
.578
.703
.828
1.000
1.250
1.562
1.813
2.062
.938
1.078
1.438
1.688
1.938
2.563
NOTES:
1. THE RP2360 ADAPTER PROVIDES A NON-ENVIRONMENTAL COUPLING BETWEEN THE MIL-C-
28840(EC) BACKSHELLS AND THE RP2100, RP2110, OR RP2120 END FITTINGS.
SPECIFICALLY, THE A-THREAD OF THIS ADAPTER (A-THREAD CODES 01 THRU 09) MATES WITH THE
V-THREAD OF THE M28840/6 BACKSHELL (STRAIGHT), THE M23340/8 BACKSHELL (90 ), OR THE
M28840/9 BACKSHELL (45 ).
THE A-THREAD CODES 10 THRU 15 MATE WITH THE C-THREADS OF M28840/5, M28840/25 OR
M28840/27. (THE A-THREAD CODES 03 AND 04 MATE WITH THESE C-THREADS ALSO).
2. THIS ADAPTER WILL ALSO MATE WITH THE PLUG ASSEMBLIES M28840/26, M28840/28 OR M28840/29
SINCE THE BACKSHELLS USED IN THESE PLUG ASSEMBLIES ARE THE M28840/6, M28840/8 AND
M28840/9 TYPES RESPECTIVELY.
3. THE COLUMN LABELED “SHELL SIZE (Ref)” IS PRESENTED FOR REFERENCE PURPOSES ONLY. IT
DOES NOT DIRECTLY EFFECT THE SELECTION OF AN ADAPTER SIZE TO MATE WITH A PARTICULAR
BACKSHELL SIZE. ONLY THE C-THREAD OR THE V-THREAD SIZE OF A BACKSHELL DETERMINES
WHICH A-THREAD SIZE OF ADAPTER TO USE.
4. DIMENSION NOT AVAILABLE
5. SEE TEXT FOR MATERIAL, FINISH, MARKING, ETC.
6. SEE PARAGRAPH 7.7 FOR CONDITIONS FOR USE OF ALUMINUM CONNECTOR BACKSHELLS.
7. DIMENSIONS ARE IN INCHES.
Figure 5-14.
RP2360 Adapter for MIL-C-28840(EC)
Backshell (Sheet 2 of 2)
5-27