S9407-AB-HBK-010 Datasheet, PDF (38/276 Pages) Glenair, Inc. – HANDBOOK OF SHIPBOARD ELECTROMAGNETIC SHIELDING PRACTICES

S9407-AB-HBK-010, Rev. 2
Notes:
1. TYPE IV BONDING STRAPS FABRICATED IAW MIL-STD 1310 (NAVY).
2. TYPE IV BONDING STRAPS FABRICATED FROM FLAT COPPER BRAID (1/2” MIINIMUM WIDTH) OF QQ-
B-575. PROVISIONS FOR INSTALLATION OF THE BRAID STRAP SHALL BE BY ONE OF THE
FOLLOWING METHODS:
A. BY INSTALLING WIRE TERMINALS ON EACH END OF THE BRAID.
B. BY SOLDER DIPPING THE ENDS OF THE BRAID THEN DRILLING MOUNTING HOLES.
C. BY SOLDERING FLAT COPPER TUBING OR STRIPS ON EACH END OF THE BRAID THEN DRILLING
MOUNTING HOLES.
Figure 3-2. Type IV Bond Strap Fabrication Details
3-6