|
MB81EDS516545_10 Datasheet, PDF (33/60 Pages) Fujitsu Component Limited. – 512M Bit (4 bank x 2M word x 64 bit) Consumer Applications Specific Memory for SiP | |||
|
◁ |
MB81EDS516545
(Continued)
Parameter
Symbol
Condition
Self Refresh Current
CKE = VIL, CS = VIL,
IDD6 address and control inputs are STABLE;
data bus inputs are STABLE
Value
Unit
Min.
Max.
â¯
6
mA
Deep Power Down
Current
IDD8
address and control inputs are STABLE;
data bus inputs are STABLE
â¯
300 μA
Notes: ⢠All voltages are referenced to VSS.
⢠After power on, initialization following power-up timing is required. DC characteristics are guaranteed
after the initialization.
⢠IDD depends on the output termination or load condition, clock cycle rate, signal clocking rate.
The specified values are obtained with the output open condition.
DS05-11463-2E
33
|
▷ |