DS07-16301-4E Datasheet, PDF (10/99 Pages) Fujitsu Component Limited. – 32-bit RISC Microcontroller CMOS FR30 Series

MB91101/MB91101A
Pin no.
LQFP*¹ QFP*²
77
80
78
81
79
82
80
83
81
84
*1: FPT-100P-M05
*2: FPT-100P-M06
10
Pin name
SO0
TRG1
PF1
SC0
OCPA3
PF2
SI1
TRG2
PF3
SO1
TRG3
PF4
SI2
OCPA1
PF5
Circuit
type
Description
UART0 data output pin
This function is available when UART0 data output is enabled.
PWM timer external trigger input pin
This function is available when serial data output of PF1, UART0
F are disabled.
Can be configured as the I/O port when SO0 and TRG1 are not
used.
This function is available when serial data output of UART0 is dis-
abled.
UART0 clock I/O pin
Clock output is available when UART0 clock output is enabled.
PWM timer output pin
F This function is available when PWM timer output is enabled.
Can be configured as the I/O port when SC0 and OCPA3 are not
used.
This function is available when UART0 clock output is disabled.
UART1 data input pin
This pin is used for input during UART1 is in input operation, and it
is necessary to disable output for other functions from this pin un-
less such output is made intentionally.
F PWM timer external trigger input pin
This pin is used for input during PWM timer external trigger is in in-
put operation, and it is necessary to disable output for other func-
tions from this pin unless such output is made intentionally.
Can be configured as the I/O port when SI1 and TRG2 are not used.
UART1 data output pin
This function is available when UART1 data output is enabled.
PWM timer external trigger input pin
F
This function is available when PF4, UART1 data outputs are dis-
abled.
Can be configured as the I/O port when SO1 and TRG3 are not
used.
This function is available when UART1 data output is disabled.
UART2 data input pin
This pin is used for input during UART2 is in input operation, and it
is necessary to disable output for other functions from this pin un-
less such output is made intentionally.
F _{PWM timer output pin}
This function is available when PWM timer output is enabled.
Can be configured as the I/O port when SI2 and OCPA1 are not
used.
(Continued)