English
Language : 

PXS20 Datasheet, PDF (84/119 Pages) Freescale Semiconductor, Inc – PXS20 Microcontroller
Electrical characteristics
Table 18. Current consumption characteristics (continued)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
IDD_HV_ADC2,3 T Operating current
TJ = 150 C
120 MHz
—
—
ADC operating at 60 MHz
VDD_HV_ADC = 3.6 V
IDD_HV_AREF3 T Operating current
TJ = 150 C
120 MHz
—
—
ADC operating at 60 MHz
VDD_HV_REF = 3.6 V
10
mA
3
mA
TJ = 150 C
120 MHz
—
—
5
ADC operating at 60 MHz
VDD_HV_REF = 5.5 V
IDD_HV_OSC T Operating current
TJ = 150 C
3.3 V supplies
120 MHz
—
—
900
A
IDD_HV_FLASH4 T Operating current
TJ = 150 C
3.3 V supplies
120 MHz
—
—
4
mA
1 Enabled Modules in 'Typical mode': FlexPWM0, ETimer0/1/2, CTU, SWG, DMA, FlexCAN0/1, LINFlex, ADC1, DSPI0/1, PIT,
CRC, PLL0/1, I/O supply current excluded
2 Internal structures hold the input voltage less than VDDA + 1.0 V on all pads powered by VDDA supplies, if the maximum
injection current specification is met (3 mA for all pins) and VDDA is within the operating voltage specifications.
3 This value is the total current for both ADCs.
4 VFLASH is only available in the calibration package.
3.11 Temperature sensor electrical characteristics
Symbol
—
P
TS
D
Table 19. Temperature sensor electrical characteristics
Accuracy
Parameter
Minimum sampling period
Conditions
TJ = –40 °C to TA = 25 °C
TJ = TA to 125 °C
—
Min Max Unit
–10 10
°C
–7
7
°C
4
—
µs
3.12 Main oscillator electrical characteristics
The device provides an oscillator/resonator driver. Figure 6 describes a simple model of the internal oscillator driver and
provides an example of a connection for an oscillator or a resonator.
PXS20 Microcontroller Data Sheet, Rev. 1
84
Freescale Semiconductor
Preliminary—Subject to Change Without Notice