English
Language : 

MC35XS3400 Datasheet, PDF (8/45 Pages) Freescale Semiconductor, Inc – Quad High Side Switch (Quad 35mΩ)
ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics (continued)
Characteristics noted under conditions 6.0V ≤ VPWR ≤ 20V, 3.0V ≤ VDD ≤ 5.5V, -40°C ≤ TA ≤ 125°C, GND = 0V, unless
otherwise noted. Typical values noted reflect the approximate parameter means at TA = 25°C under nominal conditions, unless
otherwise noted.
Characteristic
Symbol
Min
Typ
Max
Unit
OUTPUTS HS0 TO HS3 (continued)
CSR0 Current Recopy Temperature Drift (6.0V < VHS[0:3] < 20V)(15)
Output Current
Δ(CSR0_0)/Δ(T)
%/°C
2.0A
0.04
Current Sense Ratio (CSR1) Accuracy (6.0V < VHS[0:3] < 20V)
CSR1_0_ACC
%
Output Current
6.25A
39.5A
-17
–
+17
-12
–
+12
Current Sense Clamp Voltage
CSNS Open; IHS[0:3] = 2.0A with CSR0 ratio
OFF Open-load Detection Source Current(16)
OFF Open-load Fault Detection Voltage Threshold
ON Open-load Fault Detection Current Threshold
ON Open-load Fault Detection Current Threshold with LED
VHS[0:3] = VPWR - 0.75V
Output Short to VPWR Detection Voltage Threshold
Output programmed OFF
Output Negative Clamp Voltage
0.5A < IHS[0:3] < 5.0A, Output programmed OFF
VCL(CSNS)
VDD+0.25
–
V
VDD+1.0
IOLD(OFF)
30
–
100
μA
VOLD(THRES)
2.0
3.0
4.0
V
IOLD(ON)
100
300
600
mA
IOLD(ON_LED)
mA
2.5
5.0
10
VOSD(THRES)
V
VPWR-1.2 VPWR-0.8 VPWR-0.4
VCL
V
- 22
–
-16
Output Over-temperature Shutdown for 4.5V < VPWR < 28V
TSD
155
175
195
°C
Notes
15. Based on statistical data: delta(CSR0)/delta(T)={(measured ICSNS at T1 - measured ICSNS at T2) / measured ICSNS at room} / {T1-T2}. No
production tested.
16. Output OFF Open-load Detection Current is the current required to flow through the load for the purpose of detecting the existence of
an open-load condition when the specific output is commanded OFF. Pull-up current is measured for VHS=VOLD(THRES)
35XS3400
8
Analog Integrated Circuit Device Data
Freescale Semiconductor