MC9S12DP512CPVE Datasheet, PDF (79/124 Pages) Freescale Semiconductor, Inc – MC9S12DP512 Device Guide V01.25

MC9S12DP512 Device Guide V01.25
There are two Analog to Digital Converters (ATD1 and ATD0) implemented on the MC9S12DP512.
Consult the ATD_10B8C Block Guide for information about each Analog to Digital Converter module.
When the ATD_10B8C Block Guide refers to freeze mode this is equivalent to active BDM mode.
Section 11 Inter-IC Bus (IIC) Block Description
Consult the IIC Block Guide for information about the Inter-IC Bus module.
Section 12 Serial Communications Interface (SCI) Block
Description
There are two Serial Communications Interfaces (SCI1 and SCI0) implemented on the MC9S12DP512
device.
Consult the SCI Block Guide for information about each Serial Communications Interface module.
Section 13 Serial Peripheral Interface (SPI) Block
Description
There are three Serial Peripheral Interfaces (SPI2, SPI1 and SPI0) implemented on MC9S12DP512.
Consult the SPI Block Guide for information about each Serial Peripheral Interface module.
Section 14 J1850 (BDLC) Block Description
Consult the BDLC Block Guide for information about the J1850 module.
Section 15 Pulse Width Modulator (PWM) Block
Description
Consult the PWM_8B6C Block Guide for information about the Pulse Width Modulator module.
When the PWM_8B8C Block Guide refers to freeze mode this is equivalent to active BDM mode.
Section 16 Flash EEPROM 512K Block Description
Consult the FTS512K4 Block Guide for information about the flash module.
79