English
Language : 

MC68HC908GZ60 Datasheet, PDF (31/352 Pages) Freescale Semiconductor, Inc – Microcontrollers
Pin Functions
1.5.13 Port F I/O Pins (PTF7/T2CH5–PTF0)
PTF7–PTF4 are special-function, bidirectional I/O port pins that can be individually programmed to be
timer interface module (TIM2) pins.
PTF3–PTF0 are general-purpose, bidirectional I/O port pins that contain higher current sink/source
capability.
PTF7–PTF0 are only available on the 64-pin QFP package. See Chapter 18 Timer Interface Module
(TIM1), Chapter 19 Timer Interface Module (TIM2), and Chapter 13 Input/Output (I/O) Ports.
1.5.14 Port G I/O Pins (PTG7/AD23–PTBG0/AD16)
PTG7–PTG0 are general-purpose, bidirectional I/O port pins that can also be used for analog-to-digital
converter (ADC) inputs. PTG7–PTG0 are only available on the 64-pin QFP package. See Chapter 13
Input/Output (I/O) Ports and Chapter 3 Analog-to-Digital Converter (ADC).
1.5.15 Unused Pin Termination
Input pins and I/O port pins that are not used in the application must be terminated. This prevents excess
current caused by floating inputs, and enhances immunity during noise or transient events. Termination
methods include:
1. Configuring unused pins as outputs and driving high or low;
2. Configuring unused pins as inputs and enabling internal pull-ups;
3. Configuring unused pins as inputs and using external pull-up or pull-down resistors.
Never connect unused pins directly to VDD or VSS.
Since some general-purpose I/O pins are not available on all packages, these pins must be terminated
as well. Either method 1 or 2 above are appropriate.
MC68HC908GZ60 • MC68HC908GZ48 • MC68HC908GZ32 Data Sheet, Rev. 6
Freescale Semiconductor
31