|
MC68HC908GZ60 Datasheet, PDF (23/352 Pages) Freescale Semiconductor, Inc – Microcontrollers | |||
|
◁ |
Chapter 1
General Description
1.1 Introduction
The MC68HC908GZ60, MC68HC908GZ48, and MC68HC908GZ32 are members of the low-cost,
high-performance M68HC08 Family of 8-bit microcontroller units (MCUs). All MCUs in the family use the
enhanced M68HC08 central processor unit (CPU08) and are available with a variety of modules, memory
sizes and types, and package types.
The information contained in this document pertains to all three devices with the exceptions noted in
Appendix A MC68HC908GZ48 and Appendix B MC68HC908GZ32.
1.2 Features
For convenience, features have been organized to reflect:
⢠Standard features
⢠Features of the CPU08
1.2.1 Standard Features
Features of the MC68HC908GZ60 include:
⢠High-performance M68HC08 architecture optimized for C-compilers
⢠Fully upward-compatible object code with M6805, M146805, and M68HC05 Families
⢠8-MHz internal bus frequency
⢠Clock generation module supporting 1-MHz to 8-MHz crystals
⢠MSCAN08 (scalable controller area network) controller (implementing 2.0b protocol as defined in
BOSCH specification dated September 1991)
⢠FLASH program memory security(1)
⢠On-chip programming firmware for use with host personal computer which does not require high
voltage for entry
⢠In-system programming (ISP)
⢠System protection features:
â Optional computer operating properly (COP) reset
â Low-voltage detection with optional reset and selectable trip points for 3.3-V and 5.0-V
operation
â Illegal opcode detection with reset
â Illegal address detection with reset
⢠Low-power design; fully static with stop and wait modes
1. No security feature is absolutely secure. However, Freescaleâs strategy is to make reading or copying the FLASH difficult for
unauthorized users.
MC68HC908GZ60 ⢠MC68HC908GZ48 ⢠MC68HC908GZ32 Data Sheet, Rev. 6
Freescale Semiconductor
23
|
▷ |