MC9328MX21S Datasheet, PDF (30/88 Pages) Freescale Semiconductor, Inc – MX family of microprocessors

Specifications
Host Command
N_CR cycles
CMD S T Content CRC E Z Z P ****** P S T
Response
Content CRC E Z
DAT
Z****Z
Z Z P ****** P S D D D D
*****
N_AC cycles
Read Data
Timing of single block read
Host Command
N_CR cycles
CMD S T Content CRC E Z Z P ****** P S T
Response
Content CRC E Z
DAT
Z****Z
Z Z P ****** P S D D D D ***** P ***** P S D D D D *****
N_AC cycles
Read Data
N_AC cycles
Read Data
Timing of multiple block read
Host Command
N_CR cycles
CMD S T Content CRC E Z Z P ****** P S T
Response
Content CRC E Z
N_ST
DAT D D D D ***** D D D D E Z Z Z
*****
Valid Read Data
Timing of stop command
(CMD12, data transfer mode)
Figure 20. Timing Diagrams at Data Read
Figure 21 shows the basic write operation timing. As with the read operation, after the card response, the
data transfer starts after N_WR cycles. The data is suffixed with CRC check bits to allow the card to check
for transmission errors. The card sends back the CRC check result as a CC status token on the data line. If
there was a transmission error, the card sends a negative CRC status (101); otherwise, a positive CRC
status (010) is returned. The card expects a continuous flow of data blocks if it is configured to multiple
block mode, with the flow terminated by a stop transmission command.
MC9328MX21S Technical Data, Rev. 1.1
30
Freescale Semiconductor