MC9328MXS Datasheet, PDF (3/74 Pages) List of Unclassifed Manufacturers – Advance Information

• Power Management Features
• Operating Voltage Range: 1.7 V to 1.9 V core, 1.7 V to 3.3 V I/O
• 225-contact MAPBGA Package
Introduction
1.2 Target Applications
The i.MXS applications processor is designed to meet the needs of medical instrumentation, low-end
PDAs, point-of-sale terminals, security systems and other applications requiring a basic device based on
ARM technology with support for open operating systems. Like other members of the i.MX family, the
i.MXS is designed for high performance and low-power to maximize battery life.
1.3 Ordering Information
Table 1 provides ordering information.
Table 1. i.MXS Ordering Information
Package Type
225-contact MAPBGA
Frequency
100 MHz
Temperature
0^OC to 70^OC
-40^OC to 85^OC
Solderball Type
Pb-free
Pb-free
Order Number
MC9328MXSVP10(R2)
MC9328MXSCVP10(R2)
1.4 Conventions
This document uses the following conventions:
• OVERBAR is used to indicate a signal that is active when pulled low: for example, RESET.
• Logic level one is a voltage that corresponds to Boolean true (1) state.
• Logic level zero is a voltage that corresponds to Boolean false (0) state.
• To set a bit or bits means to establish logic level one.
• To clear a bit or bits means to establish logic level zero.
• A signal is an electronic construct whose state conveys or changes in state convey information.
• A pin is an external physical connection. The same pin can be used to connect a number of signals.
• Asserted means that a discrete signal is in active logic state.
— Active low signals change from logic level one to logic level zero.
— Active high signals change from logic level zero to logic level one.
• Negated means that an asserted discrete signal changes logic state.
— Active low signals change from logic level zero to logic level one.
— Active high signals change from logic level one to logic level zero.
• LSB means least significant bit or bits, and MSB means most significant bit or bits. References to
low and high bytes or words are spelled out.
• Numbers preceded by a percent sign (%) are binary. Numbers preceded by a dollar sign ($) or 0x
are hexadecimal.
MC9328MXS Technical Data, Rev. 3
Freescale Semiconductor
3