MC9328MXS Datasheet, PDF (18/74 Pages) List of Unclassifed Manufacturers – Advance Information

Functional Description and Application Information
Table 6. Maximum and Minimum DC Characteristics (Continued)
Number or
Symbol
Parameter
I_IH
Input high leakage current
(V_IN = V_DD, no pull-up or pull-down)
I_OH
Output high current
(V_OH = 0.8V_DD, V_DD = 1.8V)
I_OL
Output low current
(V_OL = 0.4V, V_DD = 1.8V)
I_OZ
Output leakage current
(V_out = V_DD, output is high impedance)
C_i
Input capacitance
C_o
Output capacitance
Min
Typical
–
–
4.0
–
-4.0
–
–
–
–
–
–
–
Max Unit
±1
μA
–
mA
–
mA
±5
μA
5
pF
5
pF
3.5 AC Electrical Characteristics
The AC characteristics consist of output delays, input setup and hold times, and signal skew times. All
signals are specified relative to an appropriate edge of other signals. All timing specifications are specified
at a system operating frequency from 0 MHz to 96 MHz (core operating frequency 100 MHz) with an
operating supply voltage from V_{DD min} to V_{DD max} under an operating temperature from T_L to T_H. All
timing is measured at 30 pF loading.
Table 7. Tristate Signal Timing
Pin
Parameter
TRISTATE Time from TRISTATE activate until I/O becomes Hi-Z
Minimum Maximum Unit
–
20.8
ns
Table 8. 32k/16M Oscillator Signal Timing
Parameter
Minimum
EXTAL32k input jitter (peak to peak)
–
EXTAL32k startup time
EXTAL16M input jitter (peak to peak) ¹
EXTAL16M startup time ¹
800
–
TBD
1 _{The 16 MHz oscillator is not recommended for use in new designs.}
RMS
5
–
TBD
–
Maximum Unit
20
ns
–
ms
TBD
–
–
–
4 Functional Description and Application Information
This section provides the electrical information including and timing diagrams for the individual modules
of the i.MXS.
MC9328MXS Technical Data, Rev. 3
18
Freescale Semiconductor