MC908JB12DWE Datasheet, PDF (282/332 Pages) Freescale Semiconductor, Inc – MC68HC908JB16 Technical Data

External Interrupt (IRQ)
15.4 Functional Description
A logic 0 applied to the external interrupt pin can latch a CPU interrupt
request. Figure 15-1 shows the structure of the IRQ module.
Interrupt signals on the IRQ pin are latched into the IRQ latch. An
interrupt latch remains set until one of the following actions occurs:
• Vector fetch — A vector fetch automatically generates an interrupt
acknowledge signal that clears the IRQ latch.
• Software clear — Software can clear the interrupt latch by writing
to the acknowledge bit in the interrupt status and control register
(ISCR). Writing a logic 1 to the ACK bit clears the IRQ latch.
• Reset — A reset automatically clears the interrupt latch.
The external interrupt pin is falling-edge-triggered and is software-
configurable to be either falling-edge or low-level-triggered. The MODE
bit in the ISCR controls the triggering sensitivity of the IRQ pin.
When the interrupt pin is edge-triggered only, the CPU interrupt request
remains set until a vector fetch, software clear, or reset occurs.
When the interrupt pin is both falling-edge and low-level-triggered, the
CPU interrupt request remains set until both of the following occur:
• Vector fetch or software clear
• Return of the interrupt pin to logic one
The vector fetch or software clear may occur before or after the interrupt
pin returns to logic 1. As long as the pin is low, the interrupt request
remains pending. A reset will clear the latch and the MODE control bit,
thereby clearing the interrupt even if the pin stays low.
When set, the IMASK bit in the ISCR mask all external interrupt
requests. A latched interrupt request is not presented to the interrupt
priority logic unless the IMASK bit is clear.
NOTE:
The interrupt mask (I) in the condition code register (CCR) masks all
interrupt requests, including external interrupt requests. (See 8.6
Exception Control.)
Technical Data
282
External Interrupt (IRQ)
MC68HC908JB16 — Rev. 1.1
Freescale Semiconductor