XRT75L00D Datasheet, PDF (79/92 Pages) Exar Corporation – E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER

REV. 1.0.2
XRT75L00D
E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
FIGURE 55. ILLUSTRATION OF CONTINUOUS-ADD POINTER ADJUSTMENT SCENARIO
Added Pointer Adjustment
Continuous Pointer Adjustments
Continuous Pointer Adjustments
T
t
Telcordia GR-253-CORE defines an "Continuous Add" Pointer Adjustment, as the "Continuous" Pointer
Adjustment pattern, with an additional pointer adjustment inserted, as shown above in Figure 55.
Telcordia GR-253-CORE mandates that the Intrinsic Jitter, within the DS3 signal that is de-mapped from a
SONET signal, which is experiencing the "Continuous Add" pattern of Pointer Adjustments, must not exceed
1.3UI-pp.
9.5.10 Continuous Cancel
Figure 56 presents an illustration of the "Continuous Cancel Pattern" Pointer Adjustment Scenario per
Telcordia GR-253-CORE.
FIGURE 56. ILLUSTRATION OF CONTINUOUS-CANCEL POINTER ADJUSTMENT SCENARIO
Continuous Pointer Adjustments
T
Cancelled
Pointer Adjustment
74