XRT75L00D Datasheet, PDF (76/92 Pages) Exar Corporation – E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER

XRT75L00D
E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
REV. 1.0.2
9.5.5 87-3 Pattern
Figure 51 presents an illustration of the "87-3 Continuous Pattern" Pointer Adjustment Scenario per Telcordia
GR-253-CORE.
FIGURE 51. AN ILLUSTRATION OF THE 87-3 CONTINUOUS POINTER ADJUSTMENT PATTERN
Repeating 87-3 Pattern (see below)
Pointer Adjustment Events
Initialization
Measurement Period
87-3 Pattern
87 Pointer Adjustment Events
No Pointer
Adjustments
NOTE: T ranges from 34ms to 10s (Req)
T
T ranges from 7.5ms to 34ms (Obj)
Telcordia GR-253-CORE defines an "87-3 Continuous" Pointer Adjustment pattern, as a repeating sequence of
90 pointer adjustment events. Within this 90 pointer adjustment event, 87 pointer adjustments are actually
executed. The remaining 3 pointer adjustments are never executed. The spacing between individual pointer
adjustment events (within this scenario) can range from 7.5ms to 10seconds.
Telcordia GR-253-CORE mandates that the Intrinsic Jitter, within the DS3 signal that is de-mapped from a
SONET signal, which is experiencing the "87-3 Continuous" pattern of Pointer Adjustments, must not exceed
1.0UI-pp.
9.5.6 87-3 Add
Figure 52 presents an illustration of the "87-3 Add Pattern" Pointer Adjustment Scenario per Telcordia GR-253-
CORE.
71