SD1010D Datasheet, PDF (30/40 Pages) List of Unclassifed Manufacturers – Digital Interface VGA TFT LCD Display Controller

Control_D
8
Interpolation H.
8
Offset
Interpolation H.
8
Offset
Interpolation V.
8
Offset
Interpolation V.
8
Offset
H. Interpolation Rest 8
Count
H. Interpolation
8
Reset Count
V. Interpolation
8
Reset Count
V. Interpolation
8
Reset Count
OSD R Weight
8
OSD G Weight
8
OSD B Weight
8
Advanced Processing 8
R Weight
Advanced Processing 8
G Weight
Advanced Processing 8
B Weight
Advanced Processing 8
*also need to specify registers “Advanced Processing R
Weight”, “Advanced Processing G Weight”,
“Advanced Processing B Weight” , “Advanced
Processing R Value”, “Advanced Processing G Value”
and “Advanced Processing B Value” for properly
functioning
Bit [6]: Dithering Scheme Selection
0: Scheme A(default)
1: Scheme B
Bit [7]: Reserved
RW 2FH[7:0] Control Register D
Bit [3:0]: Advanced Processing Shift Amount. From 0
– 8. 8 is the default value.
Bit [4]: Advance Mixing Shift Enable
0: disable(default)
1: enable
*This is a option for Advanced Post Processing
Bit [5]: OSD mode
0: Dual osd pixel mode
1: Single osd pixel mode
Bit[6]: OSD pixel swaping enable
0: disable
1: enable (only valid in single osd pixel mode)
Bit [7]: Reserved
RW 30H[7:0] High Byte For Interpolation Horizontal Offset
Default is 00H
RW 31H[7:0] Low Byte For Interpolation Horizontal Offset
Default is 00H
RW 32H{7:0] High Byte For Interpolation Vertical Offset
Default is 00H
RW 33H[7:0] Low Byte For Interpolation Vertical Offset
Default is 00H
RW 34H[7:0] Bit [2:0]: High Bits For Horizontal Interpolation Reset
Count. Default is 0H.
Bit [7:3]: Reserved
RW 35H[7:0] Low Byte For Horizontal Interpolation Reset Count.
Default is 00H.
RW 36H[7:0] Bit [1:0]: High Bits For Vertical Interpolation Reset
Count. Default is 0H.
RW 37H[7:0] Low Byte For Interpolation Vertical Reset Count.
Default is 00H.
RW 38H[7:0] Mixing Weight For OSD R. Default is 00H.
RW 39H[7:0] Mixing Weight For OSD G. Default is 00H.
RW 3AH[7:0] Mixing Weight For OSD B. Default is 00H.
RW 3BH[7:0] Weight For Advanced Post Processing R
default is 00H
RW 3CH[7:0] Weight For Advanced Post Processing G
Default is 00H
RW 3DH[7:0] Weight For Advanced Post Processing B
Default is 00H
RW 3EH[7:0] Value For Advanced Post Processing R
525 Race Street, Suite 250, San Jose, CA 95126, USA.
Main: [phone] Fax: [phone]