SD1010D Datasheet, PDF (29/40 Pages) List of Unclassifed Manufacturers – Digital Interface VGA TFT LCD Display Controller

Control_C
Bit [2:0]: Pixel Comparison Mode:
0: compare r even(default)
1: compare g even
2: compare b even
3: invalid
4: compare r odd
5: compare g odd
6: compare b odd
7: invalid
*Using pixel comparison should program register
“Pixel Comparison Value” and check register “Status
2[1:0]”
Bit [4:3]: Brightness Control:
0: disable brightness control(default)
1: reduce brightness
2: increase brightness
3: invalid
*Using brightness control should specify register
“Brightness Adjustment” and check register “Status
2[2]”
Bit [5]: Frame Modulation Mode:
0: 2-bit mode(default)
1: 1-bit mode
Bit [6]: 6-bit Panel Rounding Enable:
0: disable(default)
1: enable
Bit [7]: Frame Modulation Scheme Selection:
0: Scheme A(default)
1: Scheme B
8
RW 2EH[7:0] Control Register C
Bit [1:0]: Horizontal Interpolation Special Processing
Mode:
0: disable
1: linear
2: replication(default)
3: invalid
Bit [3:2]: Vertical Interpolation Special Processing
Mode:
0: disable
1: linear
2: replication(default)
3: invalid
Bit [4]: OSD Transparency Enable:
0: disable(default)
1: enable
*also need to program registers “OSD R Weight”,
“OSD G Weight” and “OSD B Weight”
Bit [5]: Advanced Post Processing Enable:
0: disable(default)
1: enable
525 Race Street, Suite 250, San Jose, CA 95126, USA.
Main: [phone] Fax: [phone]