LUPA-4000 Datasheet, PDF (9/49 Pages) Cypress Semiconductor – 4M Pixel CMOS Image Sensor

LUPA-4000
Data Sheet
2.3 Features and general specifications
Table 3: Features and general specifications
Feature
Electronic shutter type
Windowing (ROI)
Sub-sampling and binning
modes
Read out direction
Extended dynamic range
Analog output
Digital output
Supply voltage VDD
Logic levels
Operational temperature range
Specification/Description
Full snapshot shutter (integration during read out is possible).
Randomly programmable ROI read out.
2:1 subsampling and voltage averaging is possible (only in the X-
direction).
Read out direction can be reversed in X and Y.
Multiple slope (up to 90 dB optical dynamic range).
The output rate of 66 Mpixels/s can be achieved with either 1 or 2
analog outputs.
2 on-chip 10-bit ADC’s @ 33 Msamples/s.
Nominal 2.5V (some supplies require 3.3V).
3.3V.
0°C to 60°C; with degradation of dark current.
Interface
Package
Power dissipation
Mass
Output amplifiers
External output load
Number of outputs
Serial-to Parallel Interface (SPI).
127 pin PGA package
<200mW
<100g
Differential
R > 10 kΩ
C < 20 pF (<10 pF is advised)
1 at 66 Mpixels/sec
2 at 33Mpixels/sec
Cypress Semiconductor Corporation
3901 North First Street
San Jose, CA 95134
408-943-2600
Contact: [e-mail] Document #: 38-05712 Rev.**(Revision 1.2 )
Page 9 of 49