LUPA-4000 Datasheet, PDF (10/49 Pages) Cypress Semiconductor – 4M Pixel CMOS Image Sensor

LUPA-4000
Data Sheet
2.4 Electrical specifications
2.4.1 Recommended operating conditions
Table 4: Recommended operation conditions
Symbol
Parameter
Min Typ Max Unit
Vaa
Power supply column read out
module.
2.5
V
Va3
Power supply column read out
module
3.3
3.3
V
Vdd
Power supply digital modules
2.5
V
Voo
Power supply output stages
2.5
V
Vres
Power supply reset drivers
2.5
3.3
3.5
V
Vres_ds
Power supply multiple slope reset
driver
2.0
2.5
3.3
V
Vmem_h
Power supply memory element
(high level)
2.5
3.3
3.5
V
Vmem_l
Power supply memory element
(low level)
2.0
2.6
3.0
V
Vpix
Power supply pixel array
2.0
2.6
3.3
V
Vpre_l
Power supply for Precharge off-
state
-0.4
0
0
V
T_A
Commercial operating
temperature.
0
30
60
°C
Note:
1. All parameters are characterized for DC conditions after thermal equilibrium
has been established.
2. Unused inputs must always be tied to an appropriate logic level, e.g. either
VDD or GND.
3. This device contains circuitry to protect the inputs against damage due to high
static voltages or electric fields; however it is recommended that normal
precautions be taken to avoid application of any voltages higher than the
maximum rated voltages to this high impedance circuit.
Cypress Semiconductor Corporation
3901 North First Street
San Jose, CA 95134
408-943-2600
Contact: [e-mail] Document #: 38-05712 Rev.**(Revision 1.2 )
Page 10 of 49