AK7714 Datasheet, PDF (37/48 Pages) Asahi Kasei Microsystems – 20-Bit Audio Codec with DSP and Delay RAM

[ASAHI KASEI]
[AK7714]
c) OFRAM data read (during reset phase)
The written offset data can be read out during the reset phase. To read it, input the command code and 8-bit "0". After
that, set SI to "H" and SCLK to "L". This completes preparation for outputting the data. Then set SI to "L", and the data
is output in synchronization with the falling edge of SCLK. In this case, OFRAM can be output only from the address
data at address 0.
Data transfer procedure
{¹ Command code
{² Data input
(10010001)
(00000000)
Reading of OFRAM data
M0018-E-00
- 37 -
‘98/07