|
AK4118A Datasheet, PDF (1/56 Pages) Asahi Kasei Microsystems – High Feature 192kHz 24bit Digital Audio I/F Transceiver | |||
|
[AK4118A]
AK4118A
High Feature 192kHz 24bit Digital Audio I/F Transceiver
GENERAL DESCRIPTION
The AK4118A is a digital audio transceiver supporting 192kHz, 24bits. The channel status decoder
supports both consumer and professional modes. The AK4118A can automatically detect a Non-PCM
bit stream. When combined with the multi channel codec (AK4626A or AK4628A), the two chips provide
a system solution for AC-3 applications. The dedicated pins or a serial µP I/F can control the mode
setting. The small package, 48pin LQFP saves the system space.
*AC-3 is a trademark of Dolby Laboratories.
FEATURES
 AES3, IEC60958, S/PDIF, EIAJ CP1201 Compatible
 Low jitter Analog PLL
 PLL Lock Range: 8kHz ⼠192kHz
 Clock Source: PLL or X'tal
 8-channel Receiver input
 2-channel Transmission output (Through output or DIT)
 Auxiliary digital input
 De-emphasis for 32kHz, 44.1kHz, 48kHz and 96kHz
 Detection Functions
⢠Non-PCM Bit Stream Detection
⢠DTS-CD Bit Stream Detection
⢠Sampling Frequency Detection
(32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz)
⢠Unlock & Parity Error Detection
⢠Validity Flag Detection
⢠DAT Start ID Detection
 Up to 24bit Audio Data Format
 Audio I/F: Master or Slave Mode
 42-bit Channel Status Buffer
 Burst Preamble bit Pc and Pd Buffer for Non-PCM bit stream
 Q-subcode Buffer for CD bit stream
 Serial µP I/F (I2C, SPI)
 Two Master Clock Outputs: 64fs/128fs/256fs/512fs
 Operating Voltage: 2.7 to 3.6V with 5V tolerance
 8GPIO Port
 RX Data Input Detection
 Small Package: 48pin LQFP
 Ta: -10 to 70°C
MS1130-E-02
-1-
2009/12
|
▷ |