82-000770-01 Datasheet, PDF (55/91 Pages) Analog Devices – ADSP-TS201S EZ-KIT Lite Evaluation System

ADSP-TS201S EZ-KIT Lite Hardware Reference
Interrupt Push Buttons (SW4 and SW5)
Two push buttons, SW4 and SW5, are provided for user interrupts. The
push buttons connect to the processor’s interrupt pins. The push buttons
are active low and, when pressed, send a low (0) to the processor. Refer to
“Interrupt Pins” on page 1-11 for more information on how to use the
interrupts. Table 2-20 shows the interrupt signals and corresponding
switches.
Table 2-20. Interrupt Push Buttons
Interrupt Pin
IRQ0_A
IRQ0_B
Push Button Reference Designator
SW4
SW5
Reset Push Button (SW3)
The RESET push button, SW3, resets all ICs on the board, except the USB
interface after it has been configured.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
2-19