82-000770-01 Datasheet, PDF (44/91 Pages) Analog Devices – ADSP-TS201S EZ-KIT Lite Evaluation System

Switch Settings
Interrupt Enable Settings
Positions 3 and 5 of the SW2 switch determine how each of the processors
handles interrupts. Table 2-5 and Table 2-6 show the available interrupt
settings. Refer to the ADSP-TS201S processor data sheet at
http://www.analog.com/UploadedFiles/Data_Sheets/ADSP_TS201S.pdf
for more information.
Table 2-5. Interrupt Enable Settings (SW2 Position 3)
SW2 Position 3
OFF
ON
Interrupt Enable Mode for Processor A (U11)
Disable interrupts, level-sensitive mode (default)
Enable interrupts, edge-sensitive mode
Table 2-6. Interrupt Enable Settings (SW2 Position 5)
SW2 Position 5
OFF
ON
Interrupt Enable Mode for Processor B (U12)
Disable interrupts, level-sensitive mode (default)
Enable interrupts, edge-sensitive mode
Link Port Width Settings
Positions 4 and 6 of the SW2 switch determine the link port data width.
Table 2-7 and Table 2-8 show the available settings for the two types of
link port data widths. Refer to the ADSP-TS201S processor data sheet at
http://www.analog.com/UploadedFiles/Data_Sheets/ADSP_TS201S.pdf
for more information.
Table 2-7. Link Port Width Settings (SW2 Position 4)
SW2 Position 4
OFF
ON
Link Port Data Width for Processor A (U11)
1-bit link port data width (default)
4-bit link port data width
2-8
ADSP-TS201S EZ-KIT Lite Evaluation System Manual