82-000770-01 Datasheet, PDF (41/91 Pages) Analog Devices – ADSP-TS201S EZ-KIT Lite Evaluation System

ADSP-TS201S EZ-KIT Lite Hardware Reference
Switch Settings
This section describes the function of the DIP switches SW1, SW2, and
SW10. The locations and default settings of the switches are shown in
Figure 2-2.
Figure 2-2. Switch Locations
Audio Amplification Selection (SW1)
The SW1 switch determines the amplification of right and left signals con-
nected to the LINE IN connector J9. A non-powered electret microphone
can be used by simply varying the switch setting to the values shown in
Table 2-2. An amplification gain of a factor of 10 can be achieved by set-
ting the switch into electret microphone use.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
2-5