YGV639 Datasheet, PDF (21/34 Pages) YAMAHA CORPORATION – Video Controller 1 with Enhanced Functions

YGV639
■ Electrical Characteristics
● Absolute Maximum Ratings
Items
Symbol
Rating
Supply voltage (VDD5 pin)
V_DD5
-0.5 to +7.0
Supply voltage (VDD33, VDDIN pin)
Analog Supply Voltage (AVDD pin)
PLL Supply Voltage (PLLVDD pin)
V_DD33
V_AVD
V_PLVD
-0.5 to +4.6
-0.5 to +4.6
-0.5 to +2.5
Input Pin Voltage (VDD5 power supply pin)
V_I
Input Pin Voltage (RESET_N pin)
V_I
Input Pin Voltage
(VDD33 power supply pin other than RESET_N)
V_I
-0.5 to +7.0
-0.5 to VDD33+4.6 ( ≤5.5 Max.)
-0.5 to VDD33+0.5 ( ≤4.6 Max.)
Input Pin Voltage (AVDD power supply pin)
V_I
-0.5 to AVDD+0.5 ( ≤4.6 Max.)
Output Pin Voltage (including VDD5 power
supply, tolerant pin, and input/output pins)
V_O
-0.5 to +5.5
Output Pin Voltage
(Other VDD5 power supply pin)
V_O
-0.5 to VDD5+0.5 ( ≤5.5 Max.)
Output Pin Voltage (including VDD33 power
supply pin and input/output pins)
V_O
-0.5 to VDD33+0.5 ( ≤4.6 Max.)
Output Pin Voltage (including AVDD power
supply pin and input/output pins)
V_O
-0.5 to AVDD+0.5 ( ≤4.6 Max.)
Input Pin Current
I_I
-20 to +20
Output Pin Current
I_O
-20 to +20
Storage Temperature
T_STG
-50 to +125
Note) Refer to “Pin Table” for the details of the power supply pin and the attribute.
Note 1) Values are based on VSS(GND)=0V
Unit Note
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
mA
mA
℃
● Recommended Operating Condition
Items
Symbol
Min.
Typ.
Max. Unit Note
Power-supply Voltage (VDD33, VDDIN pins)
V_DD33
3.0
3.3
3.6
V1
Analog Power Supply (AVDD pins)
V_AVD
3.0
3.3
3.6
V1
PLL Power Supply (PLLVDD pins)
V_PLVD
1.65
1.8
1.95
V 1, 2
CPU I/F Power Supply (VDD5 pins)
V_DD5
3.0
5.0
5.25
V1
Operating Ambient Temperature
T_OP
-40
105
℃3
Note 1) Values are based on VSS(GND)=0V.
Note 2) PLLVDD pin should be connected to VOUT18 pin. No need to prepare an external 1.8V power
supply.
Note 3) This value is estimated with the following conditions:
· Four-layer substrate with the size of more than 100 mm × 120 mm
· Copper-thin film area ratio over 300%
· No solder applied between Stage and Substrate
● Consumption Current
Items
Conditions Symbol Min.
Typ
Max.
Unit Note
Total Power Consumption
Consumption Current Breakdown
VDD33, VDDIN
VDD5
C_L=20pF
V_IL=GND
V_IH=V_DD33
P_D
I_VDD
I_VDD5
544
mW 1
120
mA 1, 2
7.5
mA 1
AVDD
I_AVD
20
mA 1
Note 1) Consumption current and consumption power values are the values measured under the
recommended operating condition.
Note 2) The current flowing through PLLVDD pin is included in VDD33’s and VDDIN’s current values
because it is generated by the internal regulator.
21