DS588 Datasheet, PDF (1/24 Pages) Xilinx, Inc – Programmable interrupt generation

DS588 December 2, 2009
XPS Delta-Sigma Digital to
Analog Converter (DAC) (v1.01a)
Product Specification
Introduction
The digital to analog converter (DAC) converts a binary
number into a voltage directly proportional to the value
of the binary number. A variety of applications use
DAC including waveform generators and
programmable voltage sources. The only external
circuitry required is a low pass filter comprised of one
resistor and one capacitor.
Features
• PLB interface is based on the PLB v4.6 specification
• Selectable DAC width
• Selectable full scale output
• Programmable interrupt generation
• 16 entry deep data FIFO
LogiCORE™ IP Facts
Core Specifics
Supported Device
Family
Spartan^®-3A/3A DSP, Spartan-3,
Spartan-3E, Automotive
Spartan 3/3E/3A/3A DSP, Spartan-6,
Virtex^®-4 /4Q/4QV, Virtex-5/5FX,
Virtex-6/6CX
Resources Used
See Table 10, Table 11, Table 12, Table 13, and Table 14.
Provided with Core
Documentation
Product Specification
Design File Formats VHDL
Constraints File
EDK TCL Generated
Verification
N/A
Instantiation Template EDK
Design Tool Requirements
Xilinx Implementation
Tools
ISE® 11.4 or later
Verification
ModelSim PE/SE 6.4b or later
Simulation
ModelSim PE/SE 6.4b or later
Synthesis
XST
Support
Provided by Xilinx, Inc.
© 2006-2009 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Spartan, ISE and other designated brands included herein are trademarks of Xilinx in the United States and
other countries. The PowerPC name and logo are the registered trademarks of IBM Corp. and are used under license. All other trademarks are the property of their
respective owners.
DS588 December 2, 2009
www.xilinx.com
1
Product Specification