|
W83627EHF_0611 Datasheet, PDF (9/144 Pages) Winbond – WINBOND LPC I/O | |||
|
◁ |
W83627EHF/EF, W83627EHG/EG
⢠Programmable baud rate generator allows division of 1.8461 MHz and 24 MHz by 1 to (216-1)
⢠Maximum baud rate up to 921k bps for 14.769 MHz and 1.5M bps for 24 MHz
Infrared
⢠Support IrDA version 1.0 SIR protocol with maximum baud rate up to 115.2K bps
⢠Support SHARP ASK-IR protocol with maximum baud rate up to 57,600 bps
Parallel Port
⢠Compatible with IBM parallel port
⢠Support PS/2 compatible bi-directional parallel port
⢠Support Enhanced Parallel Port (EPP) - Compatible with IEEE 1284 specification
⢠Support Extended Capabilities Port (ECP) - Compatible with IEEE 1284 specification
⢠Enhanced printer port back-drive current protection
Game Port
⢠Support two separate Joysticks
⢠Support every Joystick two axis (X, Y) and two button (A, B) controllers
MIDI Port
⢠The baud rate is 31.25 K baud
⢠16-byte input FIFO
⢠16-byte output FIFO
Keyboard Controller
⢠8042 based with optional F/W from AMIKKEYTM-2, Phoenix MultiKey/42TM or customer code
with 2K bytes of programmable ROM, and 256 bytes of RAM
⢠Asynchronous Access to Two Data Registers and One status Register
⢠Software compatibility with the 8042
⢠Support PS/2 mouse
⢠Support port 92
⢠Support both interrupt and polling modes
⢠Fast Gate A20 and Hardware Keyboard Reset
⢠8 Bit Timer/ Counter
⢠Support binary and BCD arithmetic
⢠6 MHz, 8 MHz, 12 MHz, or 16 MHz operating frequency
Serial Flash ROM Interface
⢠Support up to 8M bits flash ROM
Publication Release Date: Nov. 2006
-3-
Revision 1.3
|
▷ |