W83627EHF_0611 Datasheet, PDF (75/144 Pages) Winbond – WINBOND LPC I/O

W83627EHF/EF, W83627EHG/EG
Bit 5: BEEP output control for AUXFANIN1 if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
Bit 4: BEEP output control for CPUFANIN1 if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
Bit 3: Reserved. This bit should be set to 0.
Bit 2-0: Index ports 0x50~0x5F Bank select.
Set to 0, select Bank0.
Set to 1, select Bank1.
Set to 2, select Bank2.
6.8.47 Winbond Vendor ID Register - Index 4Fh (Bank 0)
Register Location:
4Fh
Power on Default Value:
<15:0> = 5CA3h
Attribute:
Read Only
Size:
16 bits
15
87
0
VIDH
VIDL
Bit 15-8: Vendor ID High Byte if Index 4Eh.bit7=1. Default 5Ch.
Bit 7-0: Vendor ID Low Byte if Index 4Eh.bit7=0. Default A3h.
6.8.48 Winbond Test Register - Index 50h-55h (Bank 0)
6.8.49 BEEP Control Register 1 - Index 56h (Bank 0)
Register Location:
56h
Power on Default Value:
00h
Attribute:
Read/Write
Size:
8 bits
7 65432 1 0
EN_CPUVCORE_BP
EN_VIN0_BP
EN_AVCC_BP
EN_3VCC_BP
EN_SYSTIN_BP
EN_CPUTIN_BP
EN_SYSFANIN_BP
EN_CPUFANIN0_BP
- 69 -
Publication Release Date: Nov. 2006
Revision 1.3