W83627EHF_0611 Datasheet, PDF (28/144 Pages) Winbond – WINBOND LPC I/O

W83627EHF/EF, W83627EHG/EG
GPIO-5 Interface, continued.
SYMBOL PIN
I/O
GP55
SUSLED
GP56
PSIN
70
I/O_12t
OUT₁₂
I/OD_12t
68
IN_td
GP57
PSOUT#
I/OD_12t
67
OD₁₂
FUNCTION
General purpose I/O port 5 bit 5. (This pin is push-pull output
mode)
Suspended LED output. (This pin is push-pull output mode)
General purpose I/O port 5 bit 6.
Panel Switch Input. This pin is high active with an internal pull
down resistor.
General purpose I/O port 5 bit 7.
Panel Switch Output. This signal is used for Wake-Up system
from S5_{c o l d} state. This pin is pulse output, active low.
5.10.7 GPIO-6 Interface
see 5.4 Serial Port A
5.10.8 GPIO-1 and GPIO-4 with WDTO# / SUSLED / PLED multi-function
SYMBOL PIN
I/O
FUNCTION
GPxx*
WDTO#
---
I/OD_12t
OD₁₂
This GPxx* can be served GPIO or Watchdog timer output
signal.
GPxx**
PLED
---
I/OD_{12t This GPxx** can be served GPIO or Power LED output signal.}
OD₁₂
GPxx***
SUSLED
---
I/OD_12t
OD₁₂
This GPxx*** can be served GPIO or Suspend LED output
signal.
5.11 POWER PINS
SYMBOL
3VSB
VBAT
3VCC
PIN
61
74
12,28,48
AVCC
114
AGND
GND
117
20,55
FUNCTION
+3.3V stand-by power supply for the digital circuitry.
+3V on-board battery for the digital circuitry.
+3.3V power supply for driving 3V on host interface.
Analog +3.3V power input. Internally supplier to all analog
circuitry.
Internally connected to all analog circuitry. The ground reference
for all analog inputs.
Ground.
- 22 -