W83627EHF_0611 Datasheet, PDF (77/144 Pages) Winbond – WINBOND LPC I/O

W83627EHF/EF, W83627EHG/EG
Bit 0: BEEP output control for VIN1 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
6.8.51 Chip ID - Index 58h (Bank 0)
Register Location:
58h
Power on Default Value:
A1h
Attribute:
Read Only
Size:
8 bits
7 6 5 4 32 1 0
CHIPID
Bit 7-0: Winbond Chip ID number. Read this register will return A1h.
6.8.52 Diode Selection Register - Index 59h (Bank 0)
Register Location:
59h
Power on Default Value:
70h
Attribute:
Read/Write
Size:
8 bits
76 5 4 3 210
CPUFANIN1 DIV_B0
CPUFANIN1 DIV_B1
AUXFANIN1 DIV_B0
AUXFANIN1 DIV_B1
SELPIIV1
SELPIIV2
SELPIIV3
AUXFANIN1 DIV_B2
Bit 7: AUXFANIN1 Divisor bit2.
Bit 6: Diode mode selection of temperature AUXTIN if Index 5Dh bit3 is 1. Set this bit to 1, select
Pentium II CPU compatible thermal diode.
Bit 5: Diode mode selection of temperature CPUTIN if Index 5Dh bit2 is 1. Set this bit to 1, select
Pentium II CPU compatible thermal diode.
Bit 4: Diode mode selection of temperature SYSTIN if Index 5Dh bit1 is 1. Set this bit to 1, select
Pentium II CPU compatible thermal diode.
Bit 3-2: AUXFANIN1 Divisor bit 1:0.
Bit 1-0: CPUFANIN1 Divisor bit 1:0.
- 71 -
Publication Release Date: Nov. 2006
Revision 1.3