TI380FPAA Datasheet, PDF (8/24 Pages) Texas Instruments – PACKETBLASTERE™

TI380FPAA
PACKETBLASTER ™
SPWS038 – MAY 1997
electrical characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
(SEE NOTE 9)
MIN MAX UNIT
VOH High-level output voltage, TTL-level signal (see Note 10)
VDD = MIN,
IOH = MAX
2.4
V
VOL Low-level output voltage, TTL-level signal
VDD = MIN,
IOL = MAX
0.6 V
IOZ High-impedance output current
VDD = MAX,
VDD = MAX,
VO = 2.4 V
VO = 0.4 V
20
µA
– 20
II
Input current, any input or input / output pin
VI = VSS to VDD
± 20 µA
IDD Supply current
VDD = MAX
110 mA
Ci
Input capacitance, any input
f = 1 MHz,
Others at 0 V
15 pF
Co
Output capacitance, any output or input / output
f = 1 MHz,
Others at 0 V
15 pF
NOTES: 9. For conditions shown as MIN or MAX, use the appropriate value specified under the recommended operating conditions.
10. The following signals require an external pullup resistor: EXTINT0 and MBRQ.
8
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443