English
Language : 

MSP430FR573 Datasheet, PDF (67/109 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER
MSP430FR573x
MSP430FR572x
www.ti.com
Comparator_D
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Overdrive = 10 mV,
VIN- = (VIN+ – 400 mV) to (VIN+ + 10 mV)
tpd
Propagation delay,
AVCC = 2 V to 3.6 V
Overdrive = 100 mV,
VIN- = (VIN+ – 400 mV) to (VIN+ + 100 mV)
Overdrive = 250 mV,
(VIN+ – 400 mV) to (VIN+ + 250 mV)
CDF = 1, CDFDLY = 00
Filter timer added to the CDF = 1, CDFDLY = 01
tfilter
propagation delay of the
comparator
CDF = 1, CDFDLY = 10
CDF = 1, CDFDLY = 11
Voffset
Vic
Input offset
Common mode input
range
AVCC = 2 V to 3.6 V
AVCC = 2 V to 3.6 V
Icomp(AVCC)
Iref(AVCC)
Comparator only
Reference buffer and R-
ladder
CDON = 1, AVCC = 2 V to 3.6 V
CDREFLx = 01, AVCC = 2 V to 3.6 V
tenable,comp
Comparator enable time
CDON = 0 to CDON = 1,
AVCC = 2 V to 3.6 V
tenable,rladder
Resistor ladder enable
time
CDON = 0 to CDON = 1,
AVCC = 2 V to 3.6 V
VCB_REF
Reference voltage for a VIN = voltage input to the R-ladder,
tap
n = 0 to 31
SLAS639D – JULY 2011 – REVISED AUGUST 2012
MIN
50
0.3
0.5
0.9
1.6
-20
0
VIN ×
(n + 0.5)
/ 32
TYP
MAX UNIT
100
200 ns
80
ns
50
ns
0.5
0.9 µs
0.9
1.5 µs
1.6
2.8 µs
3.0
5.5 µs
20 mV
AVCC - 1 V
29
34 µA
20
24 µA
1.1
2.0 µs
1.1
VIN ×
(n + 1)
/ 32
2.0 µs
VIN ×
(n + 1.5) V
/ 32
FRAM
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS MIN TYP MAX UNIT
DVCC(WRITE)
tWRITE
tACCESS
tPRECHARGE
tCYCLE
Write supply voltage
Word or byte write time
Read access time (1)
Precharge time (1)
Cycle time, read or write operation (1)
Read and write endurance
2.0
120
1015
3.6 V
120 ns
60 ns
60 ns
ns
cycles
tRetention
Data retention duration
TJ = 25°C
100
TJ = 70°C
40
TJ = 85°C
10
years
(1) When using manual wait state control, see the MSP430FR57xx Family User's Guide (SLAU272) for recommended settings for common
system frequencies.
Copyright © 2011–2012, Texas Instruments Incorporated
Submit Documentation Feedback
67