MSP430FR573 Datasheet, PDF (20/109 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430FR573x
MSP430FR572x
SLAS639D – JULY 2011 – REVISED AUGUST 2012
www.ti.com
Operating Modes
The MSP430 has one active mode and seven software-selectable low-power modes of operation. An interrupt
event can wake up the device from low-power modes LPM0 through LPM4, service the request, and restore back
to the low-power mode on return from the interrupt program. Low-power modes LPM3.5 and LPM4.5 disable the
core supply to minimize power consumption.
The following eight operating modes can be configured by software:
• Active mode (AM)
– All clocks are active
• Low-power mode 0 (LPM0)
– CPU is disabled
– ACLK active, MCLK disabled, SMCLK optionally active
– Complete data retention
• Low-power mode 1 (LPM1)
– CPU is disabled
– ACLK active, MCLK disabled, SMCLK optionally active
– DCO disabled
– Complete data retention
• Low-power mode 2 (LPM2)
– CPU is disabled
– ACLK active, MCLK disabled, SMCLK optionally active
– DCO disabled
– Complete data retention
• Low-power mode 3 (LPM3)
– CPU is disabled
– ACLK active, MCLK and SMCLK disabled
– DCO disabled
– Complete data retention
• Low-power mode 4 (LPM4)
– CPU is disabled
– ACLK, MCLK, SMCLK disabled
– Complete data retention
• Low-power mode 3.5 (LPM3.5)
– RTC operation
– Internal regulator disabled
– No data retention
– I/O pad state retention
– Wake up from RST, general-purpose I/O, RTC events
• Low-power mode 4.5 (LPM4.5)
– Internal regulator disabled
– No data retention
– I/O pad state retention
– Wake up from RST and general-purpose I/O
20
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated