LM3S2637 Datasheet, PDF (618/678 Pages) Texas Instruments – Stellaris® LM3S2637 Microcontroller

Signal Tables
18.2.2 Signals by Signal Name
Table 18-6. Signals by Signal Name
Pin Name
ADC0
ADC1
ADC2
ADC3
C0+
C0-
C0o
C1+
C1-
C1o
C2+
C2-
CAN0Rx
CAN0Tx
CCP0
CCP1
CCP2
CCP3
CCP4
CCP5
CMOD0
Pin Number
B1
A1
B3
B2
A7
A6
F1
M1
B7
L8
M2
L2
G1
G2
E12
L6
D12
E1
M6
L1
E11
Pin Type
I
I
I
I
I
I
O
I
I
O
I
I
I
O
I/O
I/O
I/O
I/O
I/O
I/O
I
CMOD1
B10
I
GND
GNDA
B6
-
C4
C5
F10
F11
F12
H3
J3
J10
K5
K6
K10
L10
A5
-
B5
HIB
I2C0SCL
I2C0SDA
M12
O
C11
I/O
C12
I/O
Buffer Type^a Description
Analog Analog-to-digital converter input 0.
Analog Analog-to-digital converter input 1.
Analog Analog-to-digital converter input 2.
Analog Analog-to-digital converter input 3.
Analog Analog comparator 0 positive input.
Analog Analog comparator 0 negative input.
TTL
Analog comparator 0 output.
Analog Analog comparator 1 positive input.
Analog Analog comparator 1 negative input.
TTL
Analog comparator 1 output.
Analog Analog comparator 2 positive input.
Analog Analog comparator 2 negative input.
TTL
CAN module 0 receive.
TTL
CAN module 0 transmit.
TTL
Capture/Compare/PWM 0.
TTL
Capture/Compare/PWM 1.
TTL
Capture/Compare/PWM 2.
TTL
Capture/Compare/PWM 3.
TTL
Capture/Compare/PWM 4.
TTL
Capture/Compare/PWM 5.
TTL
CPU Mode bit 0. Input must be set to logic 0 (grounded); other
encodings reserved.
TTL
CPU Mode bit 1. Input must be set to logic 0 (grounded); other
encodings reserved.
Power Ground reference for logic and I/O pins.
Power
OD
OD
OD
The ground reference for the analog circuits (ADC, Analog
Comparators, etc.). These are separated from GND to
minimize the electrical noise contained on VDD from affecting
the analog functions.
An open-drain output with internal pull-up that indicates the
processor is in Hibernate mode.
I²C module 0 clock.
I²C module 0 data.
618
June 18, 2012
Texas Instruments-Production Data