LM3S2637 Datasheet, PDF (609/678 Pages) Texas Instruments – Stellaris® LM3S2637 Microcontroller

Stellaris^® LM3S2637 Microcontroller
Table 18-2. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Type Buffer Type^a Description
SSI0Tx
31
O
TTL
SSI module 0 transmit
SWCLK
80
I
TTL
JTAG/SWD CLK.
SWDIO
79
I/O
TTL
JTAG TMS and SWDIO.
SWO
77
O
TTL
JTAG TDO and SWO.
TCK
80
I
TTL
JTAG/SWD CLK.
TDI
78
I
TTL
JTAG TDI.
TDO
77
O
TTL
JTAG TDO and SWO.
TMS
79
I/O
TTL
JTAG TMS and SWDIO.
TRST
89
I
TTL
JTAG TRST.
U0Rx
26
I
TTL
UART module 0 receive. When in IrDA mode, this signal has
IrDA modulation.
U0Tx
27
O
TTL
UART module 0 transmit. When in IrDA mode, this signal has
IrDA modulation.
U1Rx
12
I
TTL
UART module 1 receive. When in IrDA mode, this signal has
IrDA modulation.
U1Tx
13
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has
IrDA modulation.
VBAT
55
-
Power Power source for the Hibernation module. It is normally
connected to the positive terminal of a battery and serves as
the battery backup/Hibernation module power-source supply.
VDD
8
-
Power Positive supply for I/O and some logic.
20
32
44
56
68
81
93
VDD25
14
-
Power Positive supply for most of the logic function, including the
38
processor core and most peripherals.
62
88
VDDA
3
-
Power The positive supply for the analog circuits (ADC, Analog
98
Comparators, etc.). These are separated from VDD to
minimize the electrical noise contained on VDD from affecting
the analog functions. VDDA pins must be supplied with a
voltage that meets the specification in “Recommended DC
Operating Conditions” on page 628, regardless of system
implementation.
WAKE
50
I
TTL
An external input that brings the processor out of Hibernate
mode when asserted.
XOSC0
52
I
Analog Hibernation module oscillator crystal input or an external clock
reference input. Note that this is either a crystal or a
32.768-kHz oscillator for the Hibernation module RTC.
XOSC1
53
O
Analog Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock source.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
June 18, 2012
609
Texas Instruments-Production Data