DRV2605L Datasheet, PDF (61/69 Pages) Texas Instruments – DRV2605L 2 to 5.2 V Haptic Driver for LRA and ERM With Effect Library and Smart-Loop Architecture

www.ti.com
Device Support (continued)
EFFECT ID
NO.
WAVEFORM NAME
34
Short Double Sharp Tick 1 – 100%
35
Short Double Sharp Tick 2 – 80%
36
Short Double Sharp Tick 3 – 60%
37
Long Double Sharp Click Strong 1 –
100%
38
Long Double Sharp Click Strong 2 –
80%
39
Long Double Sharp Click Strong 3 –
60%
40
Long Double Sharp Click Strong 4 –
30%
41
Long Double Sharp Click Medium 1 –
100%
DRV2605L
SLOS854C – MAY 2014 – REVISED SEPTEMBER 2014
EFFECT
ID NO>
75
76
77
78
79
80
81
82
WAVEFORM NAME
Transition Ramp Down Short Smooth 2 –
100 to 0%
Transition Ramp Down Long Sharp 1 – 100
to 0%
Transition Ramp Down Long Sharp 2 – 100
to 0%
Transition Ramp Down Medium Sharp 1 –
100 to 0%
Transition Ramp Down Medium Sharp 2 –
100 to 0%
Transition Ramp Down Short Sharp 1 – 100
to 0%
Transition Ramp Down Short Sharp 2 – 100
to 0%
Transition Ramp Up Long Smooth 1 – 0 to
100%
EFFECT ID
NO.
116
117
118
119
120
121
122
123
WAVEFORM NAME
Transition Ramp Up Short Sharp 1 – 0 to 50%
Transition Ramp Up Short Sharp 2 – 0 to 50%
Long buzz for programmatic stopping – 100%
Smooth Hum 1 (No kick or brake pulse) – 50%
Smooth Hum 2 (No kick or brake pulse) – 40%
Smooth Hum 3 (No kick or brake pulse) – 30%
Smooth Hum 4 (No kick or brake pulse) – 20%
Smooth Hum 5 (No kick or brake pulse) – 10%
12.2 Trademarks
TouchSense is a registered trademark of Immersion Corporation.
All other trademarks are the property of their respective owners.
12.3 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
12.4 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, and Orderable Information
The following pages include mechanical packaging and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
Copyright © 2014, Texas Instruments Incorporated
Product Folder Links: DRV2605L
Submit Documentation Feedback
61