|
LM3S2793 Datasheet, PDF (57/1194 Pages) Texas Instruments – Stellaris® LM3S2793 Microcontroller | |||
|
◁ |
Stellaris® LM3S2793 Microcontroller
1.3.5
Both the transmitter and receiver are capable of being a master or a slave.
The Stellaris I2S interface has the following features:
â Configurable audio format supporting I2S, Left-justification, and Right-justification
â Configurable sample size from 8 to 32 bits
â Mono and Stereo support
â 8-, 16-, and 32-bit FIFO interface for packing memory
â Independent transmit and receive 8-entry FIFOs
â Configurable FIFO-level interrupt and µDMA requests
â Independent transmit and receive MCLK direction control
â Transmit and receive internal MCLK sources
â Independent transmit and receive control for serial clock and word select
â MCLK and SCLK can be independently set to master or slave
â Configurable transmit zero or last sample when FIFO empty
â Efficient transfers using Micro Direct Memory Access Controller (µDMA)
â Separate channels for transmit and receive
â Burst requests
â Channel requests asserted when FIFO contains required amount of data
System Integration
The LM3S2793 microcontroller provides a variety of standard system functions integrated into the
device, including:
â Direct Memory Access Controller (DMA)
â System control and clocks including on-chip precision 16-MHz oscillator
â Four 32-bit timers (up to eight 16-bit)
â Eight Capture Compare PWM (CCP) pins
â Lower-power battery-backed Hibernation module
â Real-Time Clock in Hibernation module
â Two Watchdog Timers
â One timer runs off the main oscillator
â One timer runs off the precision internal oscillator
â Up to 67 GPIOs, depending on configuration
â Highly flexible pin muxing allows use as GPIO or one of several peripheral functions
January 20, 2012
57
Texas Instruments-Production Data
|
▷ |