DS90UB948-Q1_16 Datasheet, PDF (53/88 Pages) Texas Instruments – FPD-Link III to OpenLDI Deserializer

www.ti.com
DS90UB948-Q1
SNLS477A – OCTOBER 2014 – REVISED JANUARY 2016
Register Maps (continued)
Table 11. Serial Control Bus Registers (continued)
ADD
(hex)
0x0A
Register
Name
SlaveID[2]
Bit(s) Function
7:1 SLAVE ID2
0
RESERVED
0x0B SlaveID[3] 7:1 SLAVE ID3
0
RESERVED
0x0C SlaveID[4] 7:1 SLAVE ID4
0
RESERVED
0x0D SlaveID[5] 7:1 SLAVE ID5
0
RESERVED
0x0E SlaveID[6] 7:1 SLAVE ID6
0
RESERVED
0x0F SlaveID[7] 7:1 SLAVE ID7
0
0x10 SlaveAlias[0] 7:1
RESERVED
SLAVE ALIAS
ID0
0
0x11 SlaveAlias[1] 7:1
RESERVED
SLAVE ALIAS
ID1
0
RESERVED
Type
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
Description
Value (hex)
0
7-bit Remote Slave Device ID 2
Configures the physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID2, the transaction will be
remapped to this address before passing the transaction across
the Bidirectional Control Channel to the Serializer.
0
Reserved.
0
7-bit Remote Slave Device ID 3
Configures the physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID3, the transaction will be
remapped to this address before passing the transaction across
the Bidirectional Control Channel to the Serializer.
0
Reserved.
0
7-bit Remote Slave Device ID 4
Configures the physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID4, the transaction will be
remapped to this address before passing the transaction across
the Bidirectional Control Channel to the Serializer.
0
Reserved.
0
7-bit Remote Slave Device ID 5
Configures the physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID5, the transaction will be
remapped to this address before passing the transaction across
the Bidirectional Control Channel to the Serializer.
0
Reserved.
0
7-bit Remote Slave Device ID 6
Configures the physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID6, the transaction will be
remapped to this address before passing the transaction across
the Bidirectional Control Channel to the Serializer.
0
Reserved.
0
7-bit Remote Slave Device ID 7
Configures the physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID7, the transaction will be
remapped to this address before passing the transaction across
the Bidirectional Control Channel to the Serializer.
0
Reserved.
0
7-bit Remote Slave Device Alias ID 0
Configures the decoder for detecting transactions designated
for an I2C Slave device attached to the remote Serializer. The
transaction will be remapped to the address specified in the
Slave ID0 register. A value of 0 in this field disables access to
the remote I2C Slave.
0
Reserved.
0
7-bit Remote Slave Device Alias ID 1
Configures the decoder for detecting transactions designated
for an I2C Slave device attached to the remote Serializer. The
transaction will be remapped to the address specified in the
Slave ID1 register. A value of 0 in this field disables access to
the remote I2C Slave.
0
Reserved.
Copyright © 2014–2016, Texas Instruments Incorporated
Product Folder Links: DS90UB948-Q1
Submit Documentation Feedback
53