BQ25890H Datasheet, PDF (44/66 Pages) Texas Instruments – I2C Controlled Single Cell 5-A Fast Charger

BQ25890H
SLUSCC5 – SEPTEMBER 2016
www.ti.com
8.4.10 REG09
Figure 35. REG09
7
6
5
4
3
2
1
0
0
1
0
0
0
1
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 17. REG09
Bit
Field
7
FORCE_ICO
6
TMR2X_EN
5
BATFET_DIS
4
JEITA_VSET (45C-60C)
3
BATFET_DLY
2
BATFET_RST_EN
1
PUMPX_UP
0
PUMPX_DN
Type
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset
by Softwareby
by Watchdog
by Softwareby
by Watchdog
by Softwareby
by Software
by Watchdog
by Softwareby
by Softwareby
by Softwareby
by Watchdog
by Softwareby
by Watchdog
Description
Force Start Input Current Optimizer (ICO)
0 – Do not force ICO (default)
1 – Force ICO
Note:
This bit is can only be set only and always returns to 0 after ICO starts
Safety Timer Setting during DPM or Thermal Regulation
0 – Safety timer not slowed by 2X during input DPM or thermal
regulation
1 – Safety timer slowed by 2X during input DPM or thermal regulation
(default)
Force BATFET off to enable ship mode
0 – Allow BATFET turn on (default)
1 – Force BATFET off
JEITA High Temperature Voltage Setting
0 – Set Charge Voltage to VREG-200mV during JEITA hig temperature
(default)
1 – Set Charge Voltage to VREG during JEITA high temperature
BATFET turn off delay control
0 – BATFET turn off immediately when BATFET_DIS bit is set (default)
1 – BATFET turn off delay by t_{SM_DLY} when BATFET_DIS bit is set
BATFET full system reset enable
0 – Disable BATFET full system reset
1 – Enable BATFET full system reset (default)
Current pulse control voltage up enable
0 – Disable (default)
1 – Enable
Note:
This bit is can only be set when EN_PUMPX bit is set and returns to 0
after current pulse control sequence is completed
Current pulse control voltage down enable
0 – Disable (default)
1 – Enable
Note:
This bit is can only be set when EN_PUMPX bit is set and returns to 0
after current pulse control sequence is completed
44
Submit Documentation Feedback
Product Folder Links: BQ25890H
Copyright © 2016, Texas Instruments Incorporated