English
Language : 

DS100MB201_16 Datasheet, PDF (4/26 Pages) Texas Instruments – Dual Lane 2:1/1:2 Mux/Buffer with Equalization
DS100MB201
SNLS333A – APRIL 2011 – REVISED APRIL 2013
www.ti.com
Absolute Maximum Ratings(1)(2)
Supply Voltage (VDD)
-0.5V to +3.0V
LVCMOS Input/Output Voltage
-0.5V to +4.0V
Differential Input Voltage
-0.5V to (VDD+0.5V)
Differential Output Voltage
-0.5V to (VDD+0.5V)
Analog (SD_TH)
-0.5V to (VDD+0.5V)
Junction Temperature
+105°C
Storage Temperature
-40°C to +125°C
Maximum Package Power Dissipation at 25°C NJY0054A Package
4.21 W
Derate NJY0054A Package
52.6mW/°C above +25°C
ESD Rating
HBM, STD - JESD22-A114C
≥±6 kV
MM, STD - JESD22-A115-A
≥±250 V
CDM, STD - JESD22-C101-C
≥±1250 V
Thermal Resistance
θJC
θJA, No Airflow, 4 layer JEDEC
11.5°C/W
19.1°C/W
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. Absolute
Maximum Numbers are guaranteed for a junction temperature range of -40°C to +125°C. Models are validated to Maximum Operating
Voltages only.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Recommended Operating Conditions(1)
Min
Typ
Max
Units
Supply Voltage, VDD to GND
Ambient Temperature(2)
2.375
2.5
2.625
V
-40
25
+85
°C
LVCMOS
0
2.625
V
SMBus (SDA, SCL)
0
3.6
V
CML Differential Input Voltage
Supply Noise Tolerance up to 50 MHz(3)
0
2.0
Vp-p
100
mVP-P
(1) For soldering specifications: see product folder at: http://www.ti.com, http://www.ti.com/lit/SNOA549
(2) OOB signal pass-through limited to a minimum ambient temperature of -10°C.
(3) Allowed supply noise (mVP-P sine wave) under typical conditions.
4
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links: DS100MB201